
1/03 UDC 6300 Process Controller Product Manual 3
1.1 Introduction, Continued
Control Algorithms
Depending on the Control output type specified, the controller can be
configured for the following control algorithms:
• On/Off control,
• PID-A Equation,
• PID-B Equation,
• PD with Manual Reset.
• 3 Position Step Control
Duplex control can be configured for all algorithms except 3 Pos Step.
Options
Available options include:
Dual Loop / Internal Cascade Two independent loops of control or
internal cascade linking of the primary
and secondary controller in one device.
Includes output override algorithm.
Accutune Automatically adjusts the PID tuning
parameters as necessary while controlling
at setpoint in the automatic control mode.
Second Current Output Fully isolated and configurable as control
output or auxiliary output
Transmitter Power 24Vdc power to supply one or two, 4 to
20mA transmitters for the high level
inputs.
Communications Serial communications link integrates
with CRT-based RS422/485 or DMCS.
Math Options Two pre-configured algorithms have easy
implementation into either control loop.
They can be linked or used individually
and are capable of using any input with
its’ Ratio and Bias.
Gain Scheduling - 8 Gain values may be
applied to 8 Process Variable (PV) bands
for use on known non-linear processes.
Two 8-Segment Characterizers - can be
applied to Input 2, Input 4, Loop 1 Output,
or Loop 2 Output.
Polynomial Curve Characterizer-- a fifth
order polynomial equation can be used on
any one of the five analog inputs.
Totalizer Function - displays actual
current totalized value of up to 8 digits.
Digital Logic Gates - up to 5 gates can be
configured. For each gate you can select
from 8 gate types; each gate having two
input sources and one output use.
Komentarze do niniejszej Instrukcji